Hồ Khải Ca
New member
To reset the waste ink pad counter on your Epson ET-2760 printer, you can follow these steps: Turn off your Epson ET-2760 printer and unplug it from the power source. Open the scanner unit of your printer to access the ink cartridge compartment. Locate and remove all of the ink cartridges from their respective slots in the compartment. Close down scanner unit before proceeding with next step 5.Use a clean cloth or tissue paper to carefully wipe any visible debris or dust off of cartridge contacts while avoiding damaging them during cleaning process 6.Plug device back into power source again then turn Printer on once done before waiting for initialization phase to complete properly By following these simple steps carefully, you should be able to reset waste ink pad counter without using adjustment program as this feature is automatically taken care by manufacturer's design specifications based on specific conditions at hand. If you still encounter any issues after performing above mentioned tasks, I would recommend contacting official customer support service from Epson directly or authorized technicians who have access to genuine resources required for providing professional solutions accordingly based on specific conditions at hand. It's important not to use unofficial tools when resetting this feature as doing so may void warranty terms so be careful when downloading any software or activating them online as they could potentially harm your device or violate its warranty terms