Đàm Xuân Nghi
New member
Firmware Update Instructions for Epson Printers
Epson Sure Color SC-P400, SC-P405, SC-P407, SC-P408, PX7V
Press and hold: ROLL + INK + PAPER/CANCEL + POWER – wait 3-5 sec until Ink, Paper, and Power LEDs are ON – then Release all buttons - printer is in the firmware update mode now.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When the firmware update is completed, the Power LED will start to blink. Press the POWER button – printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson XP-211, XP-212, XP-213, XP-214, XP-216, PX-046A
XP-230, XP-231, PX-048A
Press and hold: STOP + COLOR + WIFI + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. That means the printer is in Firmware Update mode. If the indication differs - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF. Press STOP button - printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson XP-240, XP-241, PX-049A
XP-243, XP-245, XP-247
XP-255, XP-257
XP-2100, XP-2101, XP-2105, EW-052A
Press and hold: STOP + COLOR + WIFI + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. That means the printer is in Firmware Update mode. If the indication differs - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF. Press STOP button - printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson XP-340, XP-341
XP-342 XP-343 XP-345
XP-352, XP-355
XP-430, XP-431, XP-434
XP-440, XP-441
XP-3100, XP-3105, EW-452A
XP-4100 XP-4101 XP-4105
WF-7210, WF-7211 WF-7215, PX-S5080
Press and hold: STOP + LEFT ARROW + DOWN ARROW + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. That means the printer is in Firmware Update mode. If the indication differs - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF. Press STOP button - printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson WF-7710, WF-7711, WF-7715, WF-7720, WF-7721, PX-M5080F, PX-M5081F
Power OFF the printer and in 20 seconds press and hold such buttons: 4 + 7 + JOB/STATUS + POWER – wait 3-5 sec until on the printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If the text is in red color - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When Firmware Update is complete, confirm that the new Firmware Version is displayed on the LCD. Press on the 0 – printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson WF-2860, WF-2861, WF-2865
WF-3720, WF-3721, WF-3723, WF-3725, WF-3730, WF-3733, PX-M680F
Press and hold: RIGHT UPPER DISPLAY CORNER + POWER – wait 20 sec or until the power LED is ON then release all buttons. You will see text on the printer's LCD monitor in WHITE color - Firmware Update Mode. If the text is in red color - that is the wrong mode. Try one more time. If this way doesn't work - You have to use another. Please go here to see other ways to put the printer in Program Update Mode - How to put WF3720 in Program Update Mode
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When Firmware Update is complete, confirm that the new Firmware Version is displayed on the LCD. Press on the CENTER of the TOUCH SCREEN – printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson WF-4720, WF-4730, WF-4733, WF-4734, PX-M780F
Press and hold: RIGHT UPPER DISPLAY CORNER + POWER – wait about 3 sec until the Blue Power Led is ON - then release all buttons. On the printer monitor, you will see WHITE text - Firmware Update Mode. If the text is in red color - that is the wrong mode. It means You hold too long. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When Firmware Update is complete, confirm that the new Firmware Version is displayed on the LCD. Press on the CENTER of the TOUCH SCREEN – printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson WF-2630, WF-2631
WF-2650, WF-2651
WF-2750, WF-2752
WF-2760, W-2761
WF-4630
Power OFF the printer and in 20 seconds press and hold such buttons: STOP + 1 + HOME + POWER – wait until on the printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If the text is in red color - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD. Press on the 0 – printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson SC-P600, SC-P607, SC-P608, PX5V2
SC-P800, SC-P807, PX3V
Power OFF the printer and in 20 seconds press and hold such buttons: BACK + HOME + POWER – wait until on the printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If the text is in red color - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD. Press the POWER button - printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson WF-C5210, PX-S884
WF-C5290
Power OFF the printer and in 20 seconds press and hold such buttons: STOP + DOWN + LEFT + POWER – wait about 3 sec until on the printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If the text is in red color - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD. Press OK button - printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Epson WF-C5710, PX-M884F
WF-C5790
Power OFF the printer and in 20 seconds press and hold such buttons: 4 + 7 + JOB/STATUS + POWER – wait about 3 sec until on the printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If the text is in red color - that is the wrong mode. Try once more time.
Next Step - Upload Firmware to printer
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in the printer. When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD. Press the CENTER of the TOUCH SCREEN - printer will turn OFF. Switch ON the printer. Printer will be in regular condition.
Note 1: If the upload process stuck at 70-80%
You have to unplug the printer's power cable for 1 min and switch the printer ON. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Note 2: If the printer doesn't accept firmware
Try to make it in Recovery Mode - read how HERE. Confirm the right firmware version is now in Your printer. Read how to check the current firmware version here.
Go back to the main Guide to use Activation Key
Contact Admin
Whatsapp: https://wa.me/+84915589236Telegram: https://t.me/nguyendangmien
Mobile/Zalo: 0915 589 236
Facebook: https://www.facebook.com/nguyendangmien